|
Our range of
crash doors provide an alternative solution to PVC Strip Curtains, providing
heat retention and noise reduction in the workplace.
We supply
several types of crash doors to provide a low maintenance answer to reducing
energy waste that can occur in Shops, factories and hospitals, without affecting
speed of movement through these openings.
As with our
PVC strip curtains, we offer a full nationwide installation service for the
crash doors.
| Interflex Lite
Crash Doors
These doors are manufactured from
high quality extruded aluminium section, that has smooth lines and no
projections. Used frequently within the food industry this is a lighter duty
door than others in the range and has the panel fixings concealed within the
framework. Suitable for use on internal openings with pedestrian, hand or
light powered traffic on openings up to 2400mm wide x 2438mm high. |
 |
| Interflex
Crash Doors
Manufactured from 60mm o/d heavy wall
mild steel steam tube, with a horizontal gusset plate and vertical mild
steel flats to hold the panel in position. Suitable for
semi-external/external openings dependent on site conditions, for use by
pedestrian and powered traffic. Offering a heavier duty construction than
the Multiflex and Superflex these doors are suitable for use on openings up
to 3000mm wide x 3350mm high. N.B. On openings above 2600mm wide the
triangular gusset plates will be replaced by horizontal top tubes.
|
 |
| Multiflex
Crash Doors
Manufactured from 43mm o/d heavy wall
mild steel steam tube, with a horizontal gusset plate and vertical mild
steel flats to hold the panel in position. Suitable for use in many
applications, dependent on panel choice. They are ideal for internal
openings but can be used on semi-external/external openings dependent on site
conditions They allow access by pedestrian, hand or powered traffic on
openings up to 2400mm wide x 2600mm high. |
 |
| Powerflex
Crash Doors
Manufactured from 60mm old heavy wall
mild steel steam tube with a horizontal top tube, vertical mild steel flats
and a corner gusset plate to hold the panels in position. Suitable for heavy
duty external applications, with powered traffic. Powerflex doors are
suitable on openings up to 4000mm wide x 4000mm high and many extras are
available to increase the specification on the door framework and panels;
i.e. horizontal spring unit mechanisms, dome disc protection studs, wearpads,
increased overlap, larger clamping flats etc. N.B. On doors below 2600mm
wide the horizontal top tubes will be replaced by triangular horizontal
gusset plates. |
|
In addition to
our range of crash doors, we can also supply high speed doors with either
pneumatic or electrical operation. |
